繁中  |  English  |  日本語  |  français  |  Español
Products

Home Products > Fiber optic inspection tool > Visual Fault Locator_2 in 1

Visual Fault Locator_2 in 1

Visual Fault Locator_2 in 1

(1) Be used to located broken point in fiber optic cable, FC/SC/ST_2.5mm and LC_1.25mm ferrule (2)Equipped with a 650-nm visible laser diode,it can be operated in continuous/pulse modes for clear notice (3) Clip pocket-size pen design

Specifications:

1. Central Wavelength: 650 +/- 10 nm
2. Output : 1mW into Single mode fiber
3. Spectral Width: < 10 nm
4. Transmission: CW or 2.5 Hz pulse
5. Batteries: 2xAAA Alkaline batteries
6. Operating Temp.: 0℃ ~ 50 ℃
7. Detection Distance: 6 KM (min.)
8. Dimension: 13.5mm(O.D) X 170mm(L)
9. Weight: 88g
10. Light Source: Class 3A laser diode
11. Product contains VFL250 X 1, LC,1.25mm ferrule adapter x 1


Advantages:

1. Be used to located broken point in fiber optic cable 
2. Equipped with a 650-nm visible laser diode,it can be operated in continuous/pulse modes for clear notice
3. Green LED indicator shows the operating mode
4. Power switch on the end of battery on/off.
5. Push button operate CW/Mod. (2.5 Hz frequency) /pause
6. Clip pocket-size pen design.
7. Protective cap for extra protection.
8. LED will turn to red when battery power lower.
9. For FC/SC/ST_2.5mm ferrule and LC ferrule using
10. For LC connector fiber cable,may be checked after connected with the 1.25 ferrule adapter(FA125)